4 motor fast mode 7s fiber splicing Fusion Splicer

Specification
Applicable fiber：SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Fiber count：Single
Applicable fiber dimensions Cladding diameter: 80 -150μm, Coating diameter: 160–900μm
Typical splice loss：0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss：>60db
Fiber cleaved length:10–16mm (coating diameter< 250μm ), 16mm(coating diameter: 250–1000μm )
Splicing program:40 groups
Operate mode:Manual, Automatic
Auto-heating:Available
Typical splicing time :7 seconds
Typical heating time :26 seconds
Fiber view magnification:250X(X or Y view), 125X(X and Y view)
Viewing method and display:2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result:4000 results
Loss evaluation:Available
Tension test:1.8–2.2N
Interface:GUI menu interface, easier operation
Battery capacity:5200mAh, typical 250 cycles(splice and tube heat), pluggable inner Li-battery
Power supply:Adaptor, input: AC100–240V(50/60HZ), output: DC13.5V
Electrode life:More than 4000 ARC discharges, can be replaced conveniently
Terminals:USB 2.0 port, for uploading splice results and upgrading software
Operating condition Altitude: 0–5000m, Humidity: 0–95%, Temperature: -10℃～+50℃;Wind speed: max 15m/s
Dimension:149mm(L)x120mm(W)x127mm(H)
Weight:1.90kg including battery




Copy right @ BAUDCOM

 

地点: 6PP46R5R+6C

评论

发表评论

此博客中的热门博文

Precision Optical Fiber Cleaver

图片
  The FC-7S fiber cleaver is high precision at a low cost, suitable for any job. Compact and ergonomic, precise and durable, the fiber cleaver is perfect for all cleaving applications from Splice on Connectors to an emergency fiber restoration. The standard FC-7S cleaves 250um and 900um fibers with a 3-step process that will fulfill any cleaving requirement. The fiber cleaver is very popular in fiber construction project because of its high quality and good price.   Product model:  Fiber cleaver optical fiber cladding diameter: 125μm Fiber coating diameter: 0.25mm-0.9mm Coated outer diameter: Single core The length required to be removed before optical fiber cutting: Fiber cutting length ≥18mm Fiber cutting length ： 5-20mm Fiber cutting angle ： ≤0.8° Blade life ： 48000 （ 1000timesx16 positionx3high Size: 63Wx65Dx60H(mm) Weight: 280g(coffee color)/180(black color) Fxture: Three in one multifunction jip
阅读全文

BAUDCOM Optical Fiber Fusion Splice

图片
  The fusion splicer generally refers to the optical fiber fusion splicer used in the field of optical communication. The working principle is to use a high-voltage arc to melt the sections of the two optical fibers, and at the same time, use a high-precision motion mechanism to smoothly advance the two optical fibers into one, so as to realize the coupling of the optical fiber mode fields.    Optical fiber fusion splicer is mainly used in telecommunication operators, engineering companies and institutions for optical cable line engineering construction, line maintenance, emergency repair, production and testing of optical fiber devices, and research and teaching in scientific research institutes. 1. Classification According to different industries, fusion splicers mainly include optical fiber fusion splicers, high frequency fusion splicers, ultrasonic fusion splicers, etc. Today we mainly introduce the optical fiber fusion splicer.   1) Optical fiber fusion splicer ...
阅读全文

The important Point on Choosing fiber fusion splicer

图片
About the fiber fusion splicer you need to know Optical cable fusion splicer is also called optical fiber fusion splicer. Optical fiber fusion splicer is mainly used in optical communication, construction and maintenance of optical cable. The two ends of the optical fiber are melted by releasing the arc, and at the same time, the collimation principle is used to advance smoothly, so as to realize the coupling of the optical fiber mode field. Note: This fiber refers to each fiber in the cable.   The fusion splicer is mainly used in major telecom operators, engineering companies, private networks of enterprises and institutions, etc. It is also used to produce optical fiber splicing for passive and active components and modules. Now for the convenience of construction, a hand-held optical fiber fusion splicer has been developed, as well as a ribbon optical fiber fusion splicer specially used for splicing ribbon optical fibers.  Picture Copy Right @ BAUDCOM *When buying a fus...
阅读全文